◆ Internationally-used 96×48×115mm standard chassis, six digits, 0.56-inch digital tube display. 

◆ Input A and input B form a dual input, which can recognize the pulse encoder signal with a phase of 90 degrees. 

◆ With external clear terminal, it can be cleared by external switch control. 

◆ Set two control values to control the output of two relays, which can be used for control or alarm. 

◆ The default is 2 relays, there are 4 control output modes. (Optional 4 relays) 

◆ Automatic delay reset time can be set to realize automatic delay reset function. 

◆ Peak display function. 

◆ The current count value and set value are not lost when power is lost. 

◆ The resolution can be set to determine the proportional relationship between the input pulse and the displayed value. 

◆ External sensor: Angle and linear displacement grating sensor, providing 5V (100mA), 12V (100mA) power supply to the sensor. Other voltages can be customized. 

◆ Counting magnification: quadruple frequency. 

◆ With 4~20mA current output function (optional). 

◆ With 485 communication function: the communication baud rate is 115200bps, the transmission data frequency is 2Hz, that is, the display value is sent once in 0.5 seconds (the transmission frequency is 2 - 33Hz optional). 

◆ Power supply voltage: AC220V 50Hz 

◆ Input impedance: 5KΩ 

◆ Pulse frequency: ≤500KHz 

◆ Magnification range: 0.000~999.999

◆ Display range: -99999~999999 

◆ Pulse level: Low level: -50V~0.5V High level: 3.5~50V

◆ Contact capacity: AC250V3A DC30V3A

◆ Installation method: snap-in 

◆ Opening size: 92×43. 5mm

◆ Ambient temperature: -10°C~50°C